GivTCP Battery Card by @Codegnosis

[TomHC]

Aktuálne používam Horseshoe card na zobrazenie stavu batérií, ale dnes som našiel niečo zaujímavé a skúšobne nahodil. Len to potrebuje ručne vytvoriť zopár templatov, aby to niečo ukázalo.

https://community.home-assistant.io/t/l ... ard/745634

[TomHC]

A teraz aj screenshot s nabíjaním. Prikladám aj templates ktoré bolo treba vytvoriť u mňa:

Kód: Vybrat vše

      - name: "B1 name"
        unique_id: b1_name
        state: "LFP pack #1"

      - name: "B1 capacity"
        unique_id: b1_capacity_kwh
        unit_of_measurement: kWh
        device_class: energy
        state: >-
          {{ states('sensor.currentshunt_battery_capacity_ah') | float * 16 * 3.2 / 1000 }}

      - name: "B1 power inv"
        unique_id: b1_power_inv
        unit_of_measurement: W
        device_class: power
        state: >-
          {{ 0- states('sensor.currentshunt_power') | float }}

      - name: "B1 energy remaning"
        unique_id: b1_energy_rem
        unit_of_measurement: kWh
        device_class: energy
        state: >-
          {{ states('sensor.currentshunt_battery_capacity_ah') | float * 16 * 3.2 * states('sensor.currentshunt_state_of_charge') | float / 100000 }}

      - name: "B2 name"
        unique_id: b2_name
        state: "LFP pack #2"

      - name: "B2 capacity"
        unique_id: b2_capacity_kwh
        unit_of_measurement: kWh
        device_class: energy
        state: >-
          {{ states('sensor.cs2_battery_capacity_ah') | float * 16 * 3.2 / 1000 }}

      - name: "B2 power inv"
        unique_id: b2_power_inv
        unit_of_measurement: W
        device_class: power
        state: >-
          {{ 0- states('sensor.cs2_power') | float }}

      - name: "B2 energy remaning"
        unique_id: b2_energy_rem
        unit_of_measurement: kWh
        device_class: energy
        state: >-
          {{ states('sensor.cs2_battery_capacity_ah') | float * 16 * 3.2 * states('sensor.cs2_state_of_charge') | float / 100000 }}

      - name: "Batt max discharge power"
        unique_id: batt_max_discharge
        unit_of_measurement: W
        device_class: power
        state: 11000